| BAGkon - Controller for Bag / Pouch making Machine |
| Features | Can be interfaced with any Stepper/Servo Drive/motor to control the movement of bag /pouch pulling roller of the machine. |
| Facilitates operation on both plain / printed bags |
| ON/OFF facility to facilitate both printed & plain bags on keypad |
| Direct counter pause facility on keypad |
| Software calibration for bag length setting in MM to care different Roller diameters & Pully ratio. |
| Auto speed selection with bag size |
| Programmable speed profile with Acceleration, Deceleration , Start speed, End speed and Peak speed |
| Supports both Stepper / Servo drives interface |
| Password protection |
| 0-10 V Analog Output to control speed of main motor. Synchronize main motor with bag pulling roller |
| Unwinder Control ( Optional only in Comfort & Genius model ) |
| Ready solution with Stepper or Servo drive/motors to retrofit any mechnical / clutch brake type machines to improve Accuracy and production output ,also reduces wastage while setting up new job. |
| More than 1000 successful installations ( up to 2008) |
| Operation | Modes: JOG (Manual) / RUN (Auto) |
| Inputs | Start: Starts running of Bag pulling roll |
| Error: Limits maximum speed of main motor at given length |
| Mark: High speed input helps precise positioning in case of printed Bag / Pouch |
| Inching: Moves stepper motor forword / Reverse in manual mode |
| External Trip : To stop the auto operation |
| Outputs | Cut / Seal / Punch : Operates after running of Bag pulling roll is over, for the set time |
| Error: Operates on error like Missing mark, High speed of main motor and batch over |
| Count Over:Operates on batch counter overflow |
| Mode: Turns on in auto mode |
| Timers | Eight (00.00 to 99.99 sec.) |
| Counters | Batch ( 3 digits ): programmable - helps batching of bags |
| Cutter ( 2 digits ): programmble - helps staggered cutting |
| Totalizer ( 6 digits ): counts total no. of bags |
| | Eco | Comfort | Genius |
| Size | 96X96 | 144X144 | 144X144 |
| Digital Outputs | 1 No | 5 Nos | 12 Nos |
| Digital Inputs | 2 Nos | 5 Nos | 6 Nos |
| Batches Counter | ▬ | Yes | Yes |
| Single Strock operation | ▬ | Yes | Yes |
| Batch over missing strock | ▬ | Yes | Yes |
| Password protection | ▬ | Yes | Yes |
| Numeric keypad ( 0 to 9 keys ) | ▬ | Yes | Yes |
| Analog Output | ▬ | 1 No ( Optional) | 1 No |
| Job memory ( Optional ) | ▬ | 25 Nos | 25 Nos |
